|
|
Sizes:
.020 to 12.00 OD
.002 to 4.00 Wall
|
TYPE |
SPECIFICATIONS |
| T304-(S)-ANN |
AMS-5560, 5567, MIL-T-8504, 8506 |
| T304-(W)-ANN |
AMS-5565, 5567, MIL-T-8504, 8506 |
| T304-(S/W)-1/8 HD |
AMS-5566, MIL-T-6845 |
| T304-(S/W)-1/4 HD |
MIL-T-5695 |
| T304-(S/W)-1/2 HD |
MIL-T-5695 |
| T321-(S)-ANN |
AMS-5570, MIL-T-8606, 8808 |
| T321-(W)-ANN |
AMS-5576, MIL-T-8606, 8808 |
| T321-(S/W)-ANN |
AMS-5557, MIL-T-8606, 8808 |
| T321-(W)-ANN |
MIL-T-6737 |
| T347-(S)-ANN |
AMS-5571, MIL-T-8606, 8808 |
| T347-(W)-ANN |
AMS-5575, MIL-T-8606, 8808 |
| T347-(S/W)-ANN |
AMS-5556, MIL-T-8606, 8808 |
| T347-(W)-ANN |
MIL-T-6737 |
| T316-(S)-ANN |
AMS-5573 |
| T310-(S)-ANN |
AMS-5572 |
| T410-(S)-ANN |
AMS-5591, 5613 |
| 21-6-9-(W)-ANN |
AMS-5561, BMS-7-185, LAC-08-1173, DMS-1944 |
| 17-7 PH |
AMS-5568 |
|
Sizes
Rounds .125 to 8.00
Squares .125 to 6.00
Hexagons .250 to 3.00
Rectangles .125 to .188
|
TYPE |
SPECIFICATIONS |
| 302 |
AMS-5636, 5637 |
| 303 |
AMS-5640 |
| 303SE |
AMS-5640, 5641 |
| 304 |
AMS-5639 |
| 304L |
AMS-5647 |
| 316 |
AMS-5648, 5649, ASTM-F-138 |
| 316L |
AMS-5648, 5649 |
| 321 |
AMS-5645 |
| 347 |
AMS-5646, 5654 |
| 410 |
AMS-5613 |
| 430 |
AMS-5627 |
| 13-8 MO |
AMS-5629 |
| 15-5 PH |
AMS-5659 |
| 17-4 PH |
AMS-5622, 5643 |
| 17-7 PH |
AMS-5644 |
| 21-6-9 |
AMS-5656 |
| AM-350 |
AMS-5745 |
| AM-355 |
AMS-5743, 5744 |
| GREEK ASCOLOY |
AMS-5616 |
| CUSTOM 455³ |
AMS-5617 |
|
Sizes:
.010 to .160 x R/W x R/L
.188 to 3.00 x R/W x R/L
|
TYPE |
SPECIFICATIONS |
| 301 ANN |
AMS-5515 |
| 301 1/4 HARD |
AMS-5517 |
| 301 1/2 HARD |
AMS-5518 |
| 301 FULL HARD |
AMS-5519 |
| 302 ANN |
AMS-5516 |
| 304 ANN |
AMS-5513 |
| 304L ANN |
AMS-5513 |
| 316 ANN |
AMS-5524 |
| 321 ANN |
AMS-5510 |
| 347 ANN |
AMS-5512 |
| 410 ANN |
AMS-5504 |
| 17-4 PH |
AMS-5604, MIL-S-81501 |
| 17-7 PH |
AMS-5528, 5529, MIL-S-25043 |
| 19-9 DL |
AMS-5526 |
| AM-350 |
AMS-5546, 5548 |
| AM-355 |
AMS-5547, 5549 |
| Sizes:
.006 to .160 x R/W x R/L
Condition:
Annealed, 1/4, 1/2, 3/4, Full Hard
|
TYPE |
SPECIFICATIONS |
| 200 SERIES |
- |
| 300 SERIES |
- |
| 400 SERIES |
- |
| 17-4 PH |
AMS-5604, MIL-S-81501 |
| 17-7 PH |
AMS-5528, 5529, MIL-S-25043 |
| 17-7 PH Stainless Steel, CH900, plate, sheet, and strip |
| 17-7 PH Stainless Steel, cold rolled condition C, plate, sheet, and strip |
| 17-7 PH Stainless Steel, RH950, bar and forgings |
| 17-7 PH Stainless Steel, RH950, plate, sheet, and strip |
| 17-7 PH Stainless Steel, TH1050, bar and forgings |
| 17-7 PH Stainless Steel, TH1050, plate, sheet, and strip |
| AISI Type 302 Stainless Steel, 0% cold reduction |
| AISI Type 302 Stainless Steel, 10% cold reduction |
| AISI Type 302 Stainless Steel, 20% cold reduction |
| AISI Type 302 Stainless Steel, 30% cold reduction |
| AISI Type 302 Stainless Steel, 40% cold reduction |
| AISI Type 302 Stainless Steel, 50% cold reduction |
| AISI Type 302 Stainless Steel, 60% cold reduction |
| AISI Type 302 Stainless Steel, after cold work |
| AISI Type 302 Stainless Steel, annealed bar |
| AISI Type 302 Stainless Steel, cold rolled to 1140 MPa tensile strength |
| AISI Type 302 Stainless Steel, cold rolled to 1345 MPa tensile strength |
| AISI Type 302 Stainless Steel, cold rolled to 1550 MPa tensile strength |
| AISI Type 302 Stainless Steel, cold rolled to 703 MPa tensile strength |
| AISI Type 302 Stainless Steel, cold rolled to 986 MPa tensile strength |
| AISI Type 302 Stainless Steel, tested at 0°C (32°F) |
| AISI Type 302 Stainless Steel, tested at -195°C (-320°F) |
| AISI Type 302 Stainless Steel, tested at 205°C (400°F) |
| AISI Type 302 Stainless Steel, tested at 21°C (70°F) |
| AISI Type 302 Stainless Steel, tested at 315°C (600°F) |
| AISI Type 302 Stainless Steel, tested at -40°C |
| AISI Type 302 Stainless Steel, tested at 425°C (800°F) |
| AISI Type 302 Stainless Steel, tested at 540°C (1000°F) |
| AISI Type 302 Stainless Steel, tested at -60°C |
|
